Hitachi RAS-(4-12)HNP(1)(E) - Page 74

2 Unit Installation
60
SMGB0087 rev.0 - 12/2013
Specicationsofsnowprotectionhood
Productname Airdischargehood Rearsuctionhood Leftsuctionhood
Model ASG-NP335F ASG-NP335FS2 ASG-NP335B ASG-NP335BS2 ASG-NP335L ASG-NP335LS2
Quantity 2 per unit 1 per unit
Material
Bonderized
steel sheet
Iron
Stainless
(NSSC180)
Bonderized
steel sheet
Iron
Stainless
(NSSC180)
Bonderized
steel sheet
Iron
Stainless
(NSSC180)
Color
Gray
(1.0Y8.5/0.5 or
approximation)
—
Gray
(1.0Y8.5/0.5 or
approximation)
—
Gray
(1.0Y8.5/0.5 or
approximation)
—
Weight 3 kg 14 kg 8 kg
Assembling Knockingdown parts (assembled at eld)
Components
Hood For air discherge part x 1
For rear side air intake x 1
(Upper side x 1 lowe side x 1)
For left side air intake x 1
Fixing screw 4x(M5x12 l tapping screw) 10x (M5x14 l tapping screw) 8x (M5x12 l tapping screw)
Fixing screw
(SUS)
6x (M5x12 l
tapping screw)
6x (M5x14 l)
24x (M5x14 l
tapping screw)
24x (M5x14l)
14x (M5x12
tapping screw)
14x (M5x14)
Installation manual
Installation restriction
Installation with “Guard net”
“Wind guard” or “Air ow guide” is
not available
Installation with “Guard net” is not available
Safety wire rope for
overturning prevention
(optional parts)
ASG-SW20A