Hitachi VM-E530A - Creating and Recording a Title; Creating a Title; Characters Available for Your Title

Creating and Recording a Title
Create titles easily and personalize your recordings while keeping a permanent visual record of what is
contained on a tape. The camcorder can store a title in its memory, A title stored in memory can be
displayed and recorded at any time, A title contains two lines of up to 16 characters per line. The cam¬
corder contains 47 different characters for creating a title. When creating and recording a title, use
the TITLE ON/OFF button on the remote control . (When creating a title in the CAM mode , the
DATE/D1SP, button of the camcorder can be used instead of the TITLE ON/OFF button on the remote
control, " 0 TITLE" should be displayed in the viewfinder at this time.)
Mote; Be sure to insert the clock battery before creating a title, Although a title can be created without
the dock battery inserted, it will disappear when the battery providing power to the camcorder is
removed,
Creating a Title
1. Connect the camcorder to a power source,
2. Hold down the red button on the CAM/
OFF/VIDEO switch and slide it to either CAM
or VIDEO.
3. Press the TITLE ON/OFF button on the remote
control and a flashing cursor appears in the
viewfinder.
4, Use the STOP button to place the cursor where
you wish to begin your title.
5. Use the F.FWD and REW buttons to select the
first character of your title.
6., Once you've selected a character press the
STOP button to set it.
7. Complete the title by repeating steps 5 and 6.
JANE'S BIRTHDAY
8. When you. complete your title, press the TITLE
ON/OFF button on the remote control to store
the title in memory and remove the title
graphics from the viewfinder.
Mote: As long as the correct current time can
be displayed, the title is held in memory,
Characters available for your title
A
B
C D E F G H
1 J
K
l M
U
0
P
0
R
S T
u
¥
W
X ¥ Z
0 1 .2
3
4
5
6 7
8 9
?
/
, -
: « >
|
VWLES3GA
E39