Operation name Condition
Copy LUN paths The
speciî ´ed host groups and the LDEVs where the paths
are set must be assigned to the Storage Administrator
group permitted to manage them.
Edit command devices LDEVs where the speciî ´ed paths are set must be assigned
to the Storage Administrator group permitted to manage
them.
Edit UUIDs The speciî ´ed LDEV must be assigned to the Storage
Administrator group permitted to manage them.
Delete UUIDs The speciî ´ed LDEV must be assigned to the Storage
Administrator group permitted to manage them.
Create host groups When you open the Create Host Groups window by
specifying host groups, the speciî ´ed host groups must be
assigned to the Storage Administrator group permitted to
manage them.
Delete host groups The speciî ´ed host groups and all the LDEVs where the paths
are set to the host groups must be assigned to the Storage
Administrator group permitted to manage them.
Release Host-Reserved
LUNs
LDEVs where the speciî ´ed paths are set must be assigned
to you.
For iSCSI
Operation name Condition
Add LUN paths When you specify host groups and open the Add L
UN
Paths window, the speciî ´ed iSCSI target must be assigned
to the Storage Administrator group permitted to manage
them.
When you specify LDEVs and open the Add LUN paths
window, the speciî ´ed LDEVs must be assigned to the
Storage Administrator group permitted to manage them.
Access requirements for LUN Manager
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 104
To Next Page
Loading...
Need help?
General
