EasyManua.ls Logo

Hitachi VSP Gx00 series

Hitachi VSP Gx00 series
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The
certicate must be in X509 PEM format or X509 DER format.
Procedure
1. Close all Device Manager - Storage Navigator sessions on the SVP.
2. Open a command prompt window with administrator permissions.
3. In the folder where the certicate update tool is located, execute the following
command:
C:\MAPP\wk\Supervisor\MappIniSet>MappHcsCrtEntry.bat absolute-
path-of-signed-public-key-certificate-file
Note: A space is r
equired between MappHcsCrtEntry.bat and the signed
public key certication le path.
4. A completion message box displays. Press any key to acknowledge the message and
close the message box.
5. Close the command prompt window.
Deleting HCS certificates
You can delete the certicates you registered in the procedure of the "Registering
certicates for HCS" section. After you delete a certicate, server reliability for that
certicate is not checked by SSL communication for HCS external authentication.
Before you begin
You must be logged into the SVP.
The private HCS server key must be updated.
The certicate le must have a .crt extension. Rename the le if necessary.
The certicate must be in X509 PEM format or X509 DER format.
Procedure
1. Close all Device Manager - Storage Navigator sessions on the SVP.
2. Open a command prompt window with administrator permissions.
3. In the folder where the certicate update tool is located, execute the following
command:
C:\MAPP\wk\Supervisor\MappIniSet>MappHcsCrtDelete.bat
4. A completion message box opens. Press any key to acknowledge the message and
close the message box.
5. Close the command prompt window.
Managing SSL certificates
To improve the security of remote operations between the SVP and the storage system,
you can set up a Secure Sockets Layer (SSL) encrypted connection between them.
SSL certicates (also known as digital certicates) are used to establish a secure
encrypted connection between an SVP and a storage system. The SSL connection
protects the Hitachi Device Manager - Storage Navigator User ID and password that is
exchanged during each visit (or session).
Deleting HCS certicates
Chapter 5: Setting up security
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 146

Table of Contents

Related product manuals