Hitachi VSP Gx00 series

Exporting an audit log
Use the following procedure to send a display an audit log le on the screen or to save it
to a
le on the SVP or your laptop.
Before you begin
You must have the Audit Log Administrator (View Only) role to perform this task.
Procedure
1. In the maintenance utility Administration tree, select Audit Log Settings.
2. Click Export Audit Log.
3. To open the le without saving, click Open with and then use the pull-down menu
to select the software application to use to open the le.
4. Click OK. The auditlog.txt le is displayed.
5. To save the le, click Save File.
6. To use one of the two settings in steps 3 through 5 when you export an another
auditlog.txt le, click Do this automatically for les like this from now on.
7. Click OK.
8. Browse to the directory where you want to save the le. Use the default le name
auditlog.txt or change the le name as desired.
Click Save. The le is saved and the dialog box closes.
9. Browse to the directory where you want the le. Use the default le name
auditlog.txt or change the le name as desired.
10. Click Save. The le auditlog.txt le is saved.
Send test message to syslog server
Use the following procedure to send a test audit log message to the syslog server.
Exporting an audit log
Chapter 8:
Conguring audit logs
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 200