Hitachi VSP Gx00 series

Item Description
Electric power maximum
value
Maximum value of electric power (W)
Electric power minimum
value
Minimum value of electric power (W)
In the follo
wing cases, a lower value might be temporarily displayed:
■
When the storage system is starting up
■
Right after replacing storage system parts
■
During or after microcode update
DKC0 CL1 Temperature
average
DKC0: Average temperature of CL1 (°C)
DKC0 CL1 Temperature
maximum value
DKC0: Maximum temperature of CL1 (°C)
DKC0 CL1 Temperature
minimum value
DKC0: Minimum temperature of CL1 (°C)
DKC0 CL2 Temperature
average
DKC0: Average temperature of CL2 (°C)
DKC0 CL2 Temperature
maximum value
DKC0: Maximum temperature of CL2 (°C)
DKC0 CL2 Temperature
minimum value
DKC0: Minimum temperature of CL2 (°C)
FcSpNameInfo.csv
This CSV
le contains information about Fibre Channel Security Protocols (FCSPs). A
record is created for each initiator (host).
For details of port setting, see the Provisioning Guide. Information about the NAS module
is not displayed in this CSV le.
Table 29 FcSpNameInfo.csv le (Title: <<FC-SP Name Information>>)
Item Content
Port Port name
Host Group Host group name
Target Username WWN information about the storage system required for authentication
(16-digit he
xadecimal number)
FcSpNameInfo.csv
Appendix A: Examples of storage conguration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 256