Hitachi VSP Gx00 series User Manual

Initializing and reassigning an automatically assigned port number
You can initialize the port number that is automatically assigned to the storage system.
Caution:
■
Stop the service of the stor
age system which has the status Ready in the
Storage Device List window before initializing.
■
If you did not stop before initializing, execute
Reassigning an automatically
assigned port number (on page 61) .
Procedure
1. Logout fr
om Device Manager - Storage Navigator.
2. Stop the service of all the storage systems which have the status Ready in the
Storage Device List window.
3. Open the Windows command prompt as administrator on the SVP.
4. In the folder where the .bat le is located, execute the following command:
C:\MAPP\wk\Supervisor\MappIniSet>MappPortManageInit.bat
5. A conrmation message box displays.
■ If you want to continue, enter Y, and then press the Enter key.
■ If you want to cancel the task, enter N, and then press the Enter key.
6. Press any key to acknowledge the message and close the message box.
7. Reassign the port number.
C:\MAPP\wk\Supervisor\MappIniSet>MappPortManageRenum.bat serial-
number (optional)
Note:
A space is required between MappPortManageRenum.bat and serial-
number.
If you omitted the serial number, the batch le is run for the storage system of
83-03-01-XX/00 or later which is registered in Storage Device List window.
8. A conrmation message box displays.
■ If you want to continue, enter Y, and then press the Enter key.
■ If you want to cancel the task, enter N, and then press the Enter key.
9. Press any key to acknowledge the message and close the message box.
10. Reassign the port number for all the registered storage systems by executing Steps
7 through 9.
11. Close the Windows command prompt.
12. Start the service of the storage system.
Changing the range of an automatically assigned port number
You can change the range of the port number that is automatically assigned to the
storage system.
Initializing and reassigning an automatically assigned port number
Chapter 3: Conguring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 62

Hitachi VSP Gx00 series Specifications

General

Brand	Hitachi
Model	VSP Gx00 series
Category	Storage
Language	English