Field/Item Description
Timeout The number of seconds the SMU waits before retrying
(r
etrying is re-transmitting the authentication request to
the same RADIUS server). If the timeout is reached and
there is no response from the î ´rst RADIUS server in the
list, the SMU attempts another retry.
Retry Count When the retry limit is reached, the SMU sends the
request to the next RADIUS server in the list. When the
retry limit for the second server is reached, the SMU
attempts to reach the next server in the list, until there
are no more servers to try. If the timeout is reached,
and there are no more servers to try, the user cannot
be authenticated, and the login fails.
Check connectivity Click to check the connectivity status of the RADIUS
server.
Configuring SMU security (NAS module only)
This screen allows you to change web application security settings.
The SMU can be conî ´gured to control the hosts that can access the SMU and auxiliary
de
vices managed by the SMU.
Note: If you have a standb
y SMU, it may take up to 5 minutes after a
conî ´guration change to be synchronized with the active SMU
Procedure
1. Navigate to Home > SMU Administr
ation > Security Options.
Conî ´guring SMU security (NAS module only)
Chapter 5: Setting up security
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 175
To Next Page
Loading...
Need help?
General
