Operation name Condition
Create iSCSI targets When you open the Cr
eate iSCSI targets window by
specifying iSCSI targets, the speciî ´ed iSCSI targets must be
assigned to the Storage Administrator group permitted to
manage them.
Edit iSCSI targets The speciî ´ed iSCSI targets and ports must be assigned to
the Storage Administrator group permitted to manage
them.
Delete iSCSI targets The speciî ´ed iSCSI targets and all the LDEVs where the
paths are set to the iSCSI targets must be assigned to the
Storage Administrator group permitted to manage them.
Access requirements for Performance Monitor
The following table speciî ´es the resource access requirements for Performance Monitor
operations.
Operation name Condition
Add to ports The
speciî ´ed ports must be assigned to the Storage
Administrator group permitted to manage them.
Add new monitored
WWNs
Edit WWNs
Access requirements for ShadowImage
The following table speciî ´es the resource access requirements for ShadowImage
operations.
Operation name Condition
Create pairs Both primary volume and secondary volumes must be
assigned to the Stor
age Administrator group permitted to
manage them.
Split pairs Primary volumes must be assigned to the Storage
Administrator group permitted to manage them.
Suspend pairs
Resynchronize pairs
Release pairs
Access requirements for Performance Monitor
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 106
To Next Page
Loading...
Need help?
General
