Operation name Condition
Add Remote Connection Speciî ´ed initiator ports must be assigned to the user.
Edit Remote Connection
Options
Operation can be performed with no conditions.
Create Pairs Primary volumes must be assigned to the user.
Initiator ports of r
emote paths that are connected with the
primary volume in the remote storage must be assigned to
the user.
Split Pairs Speciî ´ed primary volumes or secondary volumes must be
assigned to the user.
Resync Pairs Primary volumes must be assigned to the user.
Delete Pairs Speciî ´ed volumes must be assigned to the user.
If primary volumes are speciî ´ed, the initiator ports of
remote paths that are connected with the primary volume
in the remote storage must be assigned to the user.
Edit Pair Options Primary volumes must be assigned to the user.
Add Remote Paths Speciî ´ed initiator ports must be assigned to the user.
Remove Remote Paths Speciî ´ed initiator ports must be assigned to the user.
Edit Remote Connection
Options
Initiator ports of remote paths that are connected to a
speciî ´ed remote storage must be assigned to the user.
Remove Remote
Connections
Initiator ports of remote paths that are connected to a
speciî ´ed remote storage must be assigned to the user.
Force Delete Pairs Speciî ´ed primary volumes or secondary volumes must be
assigned to the user.
Access requirements for global-active device
The following table speciî ´es the resource access requirements for global-active device
operations.
Operation name Condition
Edit Ports Speciî ´ed ports must be assigned to the user.
Add Remote Connection Speciî ´ed initiator ports must be assigned to the user.
Edit Remote Connection
Options
Operation can be performed with no conditions.
Access requirements for global-active device
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 108
To Next Page
Loading...
Need help?
General
