Hitachi VSP Gx00 series - Page 118

Attribute Description
Required /
Optional Default value
auth.ldap.<server_
name>.pr
otocol
LDAP protocol to use.
■
ldaps: Uses LDAP over SSL/
TLS.
■
starttls: Uses StartTLS.
When you specify "true" to
auth.ldap.<server_name>.dns_
lookup, specify ldaps.
Rquired None
auth.ldap.<server_
name>.host
A host name, an IPv4 address
or an IPv6 address of the LDAP
server. An IPv6 address must
be enclosed in square
brackets. To use StartTLS as a
protocol, specify a host name.
If this value is specied,
auth.ldap.<server_name>.dns_
lookup will be ignored
Optional
1
None
auth.ldap.<server_
name>.port
A port number of the LDAP
server.
Must be between 1 and
65,535.
2
Optional 389
auth.ldap.<server_
name>.timeout
The number of seconds before
the connection to the LDAP
server times out. It must be
between 1 and 30.
2
Required 10
auth.ldap.<server_
name>.attr
Attribute name to identify a
user (such as a user ID).
■
Hierarchical model: An
attribute name where the
value that can identify a
user is stored
■
Flat model: An attribute
name for a user entry's
RDN
sAMAccountName is used for
Active Directory.
Required None
Creating an LDAP conguration le
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 118