Hitachi VSP Gx00 series User Manual

Attribute Description
Required /
Optional
Default
value
auth.radius.server-
name.dns_lookup
Information about whether to
sear
ch the LDAP server with the
information registered in the SRV
records in the DNS server.
■
true: Searches with the
information registered in the
SRV records in the DNS server
■
false: Searches with the host
name and port number.
When "host" and "port" are
specied, the LDAP server is not
searched with the information
registered in the SRV records by
specifying "true".
Optional false
auth.radius.domain-
name.protocol
LDAP protocol to use.
■
ldaps: Uses LDAP over SSL/TLS.
■
starttls: Uses StartTLS.
When you choose ldap, specify
"true" to "auth.radius.domain-
name.dns_lookup"
Required None
auth.radius.domain-
name.host
A host name, an IPv4 address or an
IPv6 address of the LDAP server. An
IPv6 address must be enclosed in
square brackets ([ ]).
Optional
1
None
auth.radius.domain-
name.port
A port number of the LDAP server.
Must be between 1 and 65535.
2
Optional 389
auth.radius.domain-
name.searchdn
DN of the user for searching. Required None
auth.radius.domain-
name.searchpw
User password for searching.
Specify the same password that is
registered in the LDAP server.
Required None
auth.radius.domain-
name.basedn
Base DN for searching for users to
authenticate. Specify DN of the
hierarchy, including all the users for
searching because the targeted
users for searching are in lower
hierarchy than the specied DN.
3
Optional abbr
Creating a RADIUS conguration le
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 124

Hitachi VSP Gx00 series Specifications

General

Brand	Hitachi
Model	VSP Gx00 series
Category	Storage
Language	English