Field/Item Description
Read-Only User Deî ´nes the user as read-only. A read-only user may be given
Global, Server, Stor
age or Server+Storage access. Based on
their deî ´ned role, an individual user may or may not perform
speciî ´c tasks, such as viewing, creating, or modifying î ´les and
data. A read-only user has permission to view most pages of
the NAS Manager; however, they are not generally allowed to
perform any actions that would trigger a system or
conî ´guration change.
Note: Read-only users can not access the CLI, and a
user with CLI access may not be r
ead-only. If either
of these options is checked, the other one is
disabled.
SMU CLI Access
(for Global
Administrators
only)
If the administrator is allowed to log in and access the SMU CLI
of an external SMU, select the SMU CLI Access check box.
Available
Managed
Servers
For Server administrators, Storage administrators, and Server
+Storage administrators, lists the servers managed by the SMU
to which the administrator has not yet been given management
privileges. Not available for Global administrators, because
Global administrators are allowed to manage all storage and all
servers.
Selected
Managed
Servers
For Server administrators, lists the servers that the
administrator can manage. Note that a Server administrator
cannot manage the storage attached to these servers. Not
available for Global administrators, because Global
administrators are allowed to manage all storage and all
servers.
For Storage administrators, lists servers that have attached
storage that the administrator can manage. Note that a Storage
administrator cannot manage these servers, only the storage
attached to these servers.
For Server+Storage administrators, lists servers that the
administrator can manage. The Server+Storage administrator
can also manage the storage attached to these servers.
3. Enter the user name for the ne
w administrator in the Name î ´eld.
4. Specify if the administrator login is authenticated locally (by the SMU) or by a
RADIUS server by selecting the appropriate User Type.
Note: If you ar
e authenticating this user through a RADIUS server, the
Password and Conî ´rm Password î ´elds are not available, and you
should skip the next step. You must enter the user passwords into the
RADIUS server using the tools available for that server.
Adding an SMU user (an administrator)
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 134
To Next Page
Loading...
Need help?
General
