Item Content
LDEV Attribute LDEV Attribute:
■
CMDDEV (Command de
vice)
■
CMDDEV
1
(Remote command device)
■
Journal (Journal volume)
■
Pool (Pool volume)
■
Quorum disk (used with global-active device)
■
ALU
■
SLU
■
Deduplication system data volume
■
Regular (Others)
Volume Size(Cyl) LDEV capacity (in cylinders)
Volume Size(MB) LDEV capacity (in MB)
Volume Size(Blocks) LDEV capacity (in blocks)
CVS Information about whether the LDEV is a custom-sized volume:
■
On: Custom-sized volume
■
O: Others
Pool ID Pool number. This is blank except for the following cases:
■
If "LDEV Type" is Dynamic Provisioning
■
If LDEV Attribute is Pool
RAID Concatenation#0 Number of parity group to be concatenated to parity group (#0) identied
by ECC Group. Blank if the parity group is not concatenated to another
parity group.
RAID Concatenation#1 Number of parity group to be concatenated to parity group (#1) identied
by ECC Group. Blank if the parity group is not concatenated to another
parity group.
RAID Concatenation#2 Number of parity group to be concatenated to parity group (#2) identied
by ECC Group. Blank if the parity group is not concatenated to another
parity group.
ORACLE CHECK SUM Information about whether this LDEV is an Oracle check sum target.
■
On
■
O
Current MPU Number of the MP unit currently controlling the LDEV.
(MPU-10, MPU-11, MPU-20, MPU-21)
LdevInfo.csv
Appendix A: Examples of storage conguration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 265