Mode Category Description Default MCU/RCU
1093 Dynamic
Pr
ovisioning
Dynamic
Tiering
Thin Image
This SOM is used to disable background unmap
during microcode downgrade from a version that
supports pool reduction rate correction to a version
that does not support the function.
Mode 1093 = ON: Background unmap cannot work.
Mode 1093 = OFF (default): Background unmap can
work.
Note: This SOM is applied when downgrading
microcode from a version that supports pool
reduction rate correction to a version that does not
support the function is disabled.
OFF -
1097 Common This SOM disables the warning LED to blink when
speciî ´c SIMs are reported.
Mode 1097 = ON: When SIM=452XXX, 462XXX,
3077XY, 4100XX, or 410100 is reported, the warning
LED does not blink.
Mode 1097 = OFF (default): When SIM=452XXX,
462XXX, 3077XY, 4100XX, or 410100 is reported, the
warning LED blinks.
Note: This SOM disables the warning LED to blink
when speciî ´c SIMs are reported.
OFF -
System option modes
Appendix B: System option modes
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 342
To Next Page
Loading...
Need help?
General
