Hitron CGNM 2250 - Device Filter Screen

SECURITY
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
104
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
104
Hitron CGNM-2250 User’s Guide
7.4 The Device Filter Screen
Use this screen to configure Media Access Control (MAC) address filtering on the
LAN, and to configure IP filtering.
You can set the CGNM-2250 to allow only certain devices to access the CGNM-2250
and the network, or to deny certain devices access.
You can turn filtering on or off, and configure new and existing filtering rules.
Click Security > Device Filter. The following screen displays.
Rule Status Use this field to select whether the filtering rule should
be active or not.
Select Enabled to activate the rule. Matching traffic
will be blocked.
Select Disabled to deactivate the rule. Matching
traffic will not be blocked.
Apply Click this to save your changes to the fields in this
screen.
Close Click this to return to the Service Filter screen without
saving your changes to the trust PC list.