Hitron CGNM 2250 - Adding or Editing a Managed Device

SECURITY
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
106
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
106
Hitron CGNM-2250 User’s Guide
7.4.1 Adding or Editing a Managed Device
To add a new managed device, click Add Managed Device in the Security >
Device Filter screen.
To edit an existing managed device, locate the device in the Security > Device
Filter screen and click its Manage button.
The following screen displays.
Block Rules Use these buttons to control the action to be taken for
the devices listed:
Select Allow All to ignore the Managed Devices
list and let all devices connect to the CGNM-2250.
Select Allow to permit only devices you added to
the Managed Devices list to access the CGNM-
2250 and the network. All other devices are denied
access.
Select Deny to permit all devices except those you
added to the Managed Devices list to access the
CGNM-2250 and the network. The specified
devices are denied access.
Host Name This displays the name of each network device in the
list.
MAC Address This displays the Media Access Control (MAC) address
of each network device in the list.
Managed Weekdays This displays the days of the week on which the device
is managed.
Managed Time This displays the start (From) and end (To) of the time
period during which the device is managed, on the
specified Managed Weekdays.
Action Click Manage to make changes to a filtering rule (see
Adding or Editing a Managed Device on page 106).
Save Changes Click this to save your changes to the fields in this
screen.
Add Managed Device Click this to add a new service filtering rule (see Adding
or Editing a Managed Device on page 106).
Help Click this to see information about the fields in this
screen.
Table 39: The Security: Device Filter Screen (continued)