EasyManua.ls Logo

Hitron CGNM 2250 - Hardware Connections

Hitron CGNM 2250
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INTRODUCTION
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
14
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
14
Hitron CGNM-2250 User’s Guide
1.1.1 Key Features
The CGNM-2250 provides:
High-performance DOCSIS 3.0 (24-channel downstream, 8-channel upstream)
Internet connection to cable modem service via the CATV port (F-type RF
connector) at speeds of up to 960 Mbps (megabits per second)
Full dual-stack IPv4/IPv6 support for routing and firewall (DSLite and 6RD)
Local Area Network connection via four 10/100/1000 Mbps Ethernet ports
Dynamic Host Configuration Protocol (DHCP) for devices on the LAN
LAN troubleshooting tools (Ping and Traceroute)
IEEE 802.11a/b/g/n/ac concurrent dual band (2.4GHz and 5GHz) wireless MIMO
(Multiple-In, Multiple-Out) networking, allowing speeds of up to
450Mbps+1300Mbps PHY data rate.
Wireless security: WEP, WPA-PSK and WPA2-PSK encryption, WiFi Protected
Setup (WPS) push-button and PIN configuration, MAC filtering,
Wired security: stateful inspection firewall with intrusion detection system, IP and
MAC filtering, port forwarding and port triggering, De-Militarized Zone (DMZ)
Settings backup and restore
Secure configuration interface, accessible by Web browser
1.2 Hardware Connections
This section describes the CGNM-2250’s physical ports and buttons.

Table of Contents

Other manuals for Hitron CGNM 2250

Related product manuals