STATUS
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
44
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
44
Hitron CGNM-2250 User’s Guide
3.3 The System Information Screen
Use this screen to see general information about your CGNM-2250’s hardware, its
software, and its connection to the Internet.
NOTE: Most of the information that displays in this screen is for troubleshooting
purposes only. However, you may need to use the MAC Address information
when setting up your network.
MAC Address This displays the Media Access Control (MAC) address
of each network device in the list.
Managed Time This displays the start (From) and end (To) of the time
period during which the device is managed, on the
specified Managed Weekdays.
Managed Weekdays This displays the days of the week on which the device
is managed.
Keyword Filter
Keywords Status This displays Active when a Keyword Filter is Enabled.
Keyword Enter the keyword that you want to block. The CGNM-
2250 examines both the page’s URL (Internet address)
and its page content (text).
Blocked Time Use these fields to specify the period during which the
rule should be applied. Enter the start time in the From
fields, using twenty-four hour notation, and enter the
end time in the To fields.
Blocked Weekdays Use these fields to specify the times at which the
keyword should be blocked. A red background indicates
that the rule will be applied (access will be blocked), and
a green background indicates that the device will not be
applied (access will not be blocked). Click a day to
toggle the rule on or off for the relevant day.
Trusted PC List
Device Name
This displays the name of each network device connected.
IP Address This displays the IP address of each network device
connected.
Rule Status This displays whether or not the keyword filter rule is
enabled to the trust device connected.
Table 11: The Status: Overview Screen (continued)
To Next Page
Loading...
