BASIC
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
61
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
61
Hitron CGNM-2250 User’s Guide
4.4.1 Adding or Editing a Port Forwarding Rule
To add a new port forwarding rule, click Add Rule in the Basic > Port
Forwarding screen.
To edit an existing port forwarding rule, click Manage in the Basic > Port
Forwarding screen.
Protocol This field displays the protocol or protocols to which this
rule applies:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Transmission Control Protocol and User Datagram
Protocol (TCP/UDP)
Generic Routing Encapsulation (GRE)
Encapsulating Security Protocol (ESP)
Local IP Address This displays the IP address of the computer on the LAN
to which traffic conforming to the rule’s conditions is
forwarded.
Remote IP Address This displays the IP address range on the WAN from
which traffic is forwarded (if configured).
Status Use this field to turn port forwarding rule on or off.
Manage Use this field to Edit a port forwarding rule. Port
forwarding must first be set to Enabled. See Adding or
Editing a Port Forwarding Rule on page 61 for
information on the screen that displays.
Action Use this field to Delete a port forwarding rule. The
deleted rule’s information cannot be retrieved.
Add Rule Click this to define a new port forwarding rule. Port
forwarding must first be set to Enabled. See Adding or
Editing a Port Forwarding Rule on page 61 for
information on the screen that displays.
Save Changes Click this to save your changes to the fields in this
screen.
Help Click this to see information about the fields in this
screen.
Table 18: The Basic: Port Forwarding Screen (continued)
To Next Page
Loading...
