STATUS
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
43
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
43
Hitron CGNM-2250 User’s Guide
Service Filter
Filter Status This displays Active when a Service Filter is Enabled.
Host Name This displays the name for the application for which you
want to create the rule.
Protocol This field displays the protocol or protocols to which this
filtering rule applies:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Port Range This displays the start and end port for which this
filtering rule applies.
Managed Time This displays the start (From) and end (To) of the time
period during which this rule applies, on the specified
Managed Weekdays.
Managed Weekdays This displays the days of the week on which this rule
applies.
Trusted PC List
Device Name
This displays the name of the trust device connected.
IP Address
This displays the IP address of the trust network device
connected.
Status
This displays whether or not the service filter rule is
enabled to the trust device connected.
Device Filter
Block Rules Status This displays the status of the devices listed.
Allow All: ignore the Managed Devices list and let
all devices connect to the CGNM-2250.
Allow: permit only devices you added to the
Managed Devices list to access the CGNM-2250
and the network. All other devices are denied
access.
Deny: permit all devices except those you added to
the Managed Devices list to access the CGNM-
2250 and the network. The specified devices are
denied access.
Host Name This displays the name of each network device in the
list.
Table 11: The Status: Overview Screen (continued)
To Next Page
Loading...
