INTRODUCTION
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
25
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
25
Hitron CGNM-2250 User’s Guide
Press the RESET button on the CGNM-2250, and hold it in for 5 seconds or
longer.
Click Admin > Device Reset. In the screen that displays, click the Factory
Reset button.
After the operation, the CGNM-2250 turns off and on again, using its factory default
settings.
NOTE: Depending on your CGNM-2250’s previous configuration, you may need to
re-configure your computer’s IP settings; see IP Address Setup on page 21.
To Next Page
Loading...
