WIRELESS
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
80
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
80
Hitron CGNM-2250 User’s Guide
Wireless Mode Select the type of 5GHz wireless network that you want
to use:
802.11n 5g: use IEEE 802.11n 5GHz.
NOTE: At the time of writing IEEE 802.11n is the only
5GHz network type available.
NOTE: Only wireless clients that support the network
protocol you select can connect to the wireless
network.
Channel Bandwidth Select the 5GHz wireless channel bandwidth that you want
to use.
Wireless Channel Select the 5GHz wireless channel that you want to use,
or select Auto to have the CGNM-2250 select the
optimum channel to use.
NOTE: Use the Auto setting unless you have a specific
reason to do otherwise.
WPS Enabled Use this field to turn WiFi Protected Setup (WPS) on or
off on the 5GHz network.
Select ON to enable WPS.
Deselect OFF to disable WPS.
Multiple SSID Settings
Multiple SSID Click this to view settings for the main 5GHz SSID.
Network Name (SSID) Enter the name that you want to use for this SSID. This
is the name that identifies your network, and to which
wireless clients connect.
NOTE: It is suggested that you change the SSID from
its default, for security reasons.
Enable Use this field to enable or disable the SSID.
Select ON to enable the SSID.
Deselect OFF to disable the SSID.
Table 25: The Wireless: Basic Settings Screen (5G) (continued)
To Next Page
Loading...
