Hitron CGNM 2250 - Page 85

WIRELESS
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
85
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
85
Hitron CGNM-2250 User’s Guide
Type This displays whether the device’s IP address was
assigned by DHCP (DHCP-IP), or self-assigned.
Interface This displays the name of the interface on which the
relevant device is connected.
Status This displays if the device filter is active or not.
Action Click Manage to make changes to the device’s filtering
status; see Adding or Editing a Managed Device on
page 86 for information on the screen that displays.
Managed Devices
Block Rules Use these buttons to control the action to be taken for
the devices listed:
Select Allow All to ignore the Devices list and let
all devices connect wirelessly to the CGNM-2250.
Select Allow to permit only devices you added to
the Devices list to access the CGNM-2250 and the
network wirelessly. All other devices are denied
access.
Select Deny to permit all devices except those you
added to the Devices list to access the CGNM-
2250 and the network wirelessly. The specified
devices are denied access.
Host Name This field displays the name of the wireless device.
MAC Address This field displays the device’s MAC (Media Access
Control) address.
Action Click Manage to make changes to the device’s filtering
status; see Adding or Editing a Managed Device on
page 86 for information on the screen that displays.
Save Changes Click this to save your changes to the fields in this
screen.
Add Managed Device Click this to add a new service filtering rule (see Adding or
Editing a Managed Device on page 86
).
Help Click this to see information about the fields in this
screen.
Table 27: The Wireless: Access Control Screen (continued)