Selenia User Guide
Chapter 7—Maintenance and Cleaning
110 MAN-03270 Revision 003
7.1.2 To Prevent Possible Injury or Equipment Damage
Do not use a corrosive solvent, abrasive detergent, or polish. Select a cleaning/disinfecting
agent that does not damage the plastics, aluminum, or carbon fiber.
Do not use strong detergents, abrasive cleaners, high alcohol concentration, or methanol
at any concentration.
Do not expose equipment parts to steam or high temperature sterilization.
Do not let liquids enter the internal parts of the equipment. Do not apply cleaning sprays
or liquids to the equipment. Always use a clean cloth and apply the spray or liquid to the
cloth. If liquid enters the system, disconnect the electrical supply and examine the system
before returning it to use.
Caution:
Wrong cleaning methods can damage the equipment,
decrease imaging performance, or increase the risk of
electric shock.
Always follow instructions from the manufacturer of the product you use for cleaning.
The instructions include the directions and precautions for the application and contact
time, storage, wash requirements, protective clothing, shelf life, and disposal. Follow the
instructions and use the product in the most safe and effective method.
7.2 Care and Cleaning—Acquisition Workstation and Value
Console
7.2.1 How to Clean the Preview Display
Avoid touching the display screen.
Use care when cleaning the outer surface of the LCD screen. Always use a clean, soft,
lint-free cloth to clean the display area. Microfiber cloths are recommended.
• Never use a spray or flow a liquid on the display.
• Never apply any pressure to the display area.
• Never use a detergent with fluorides, ammonia, alcohol, or abrasives.
• Never use any bleach.
• Never use any steel wool.
• Never use a sponge with abrasives.
There are many commercially available products to clean LCD displays. Any of the
products free of the ingredients described above and used according to the directions of
the manufacturer can be used.
To Next Page
Loading...
