Honda BF135A - Page 71

2-61
[6]
No.2 FUEL INJECTOR
2P CONNECTOR
[4]
KNOCK SENSOR
1P CONNECTOR
[5]
KNOCK
SENSOR
[7]
No.3 FUEL INJECTOR
2P CONNECTOR
[9]
No.4 FUEL INJECTOR
2P CONNECTOR
[12]
FUEL PUMP
2P CONNECTOR
[13]
CABLE
CLIP
[3]
MAIN WIRE
HARNESS
[1]
HARNESS
BAND CLIP
[8]
COVER LOCK
CABLE B
[10]
COVER LOCK
CABLE A
[2] HOSE CLAMP
• Set the fuel hose (high pressure side) in the clamp of the larger
diameter side and the main wire harness in the smaller diameter
side.
• Clamp the fuel hose (high pressure side) at the left-hand side to
the marked point.
[2]-1 ENGINE
SIDE
[2]-3 FUEL HOSE (HIGH
PRESSURE SIDE)
[2]-3 FUEL HOSE (HIGH
PRESSURE SIDE)
[11] FUEL HOSE (HIGH
PRESSURE SIDE)
[2]-5
MARKING
[2]-4
HOSE CLAMP
[2]-2 MAIN WIRE
HARNESS