Need help?Do you have a question about the Honda V45 MAGNA-VF750C 1982 and is the answer not in the manual?
General| Bore x Stroke | 70.0 mm x 48.6 mm |
|---|---|
| Compression Ratio | 10.5:1 |
| Cooling System | Liquid cooled |
| Transmission | 6-speed |
| Final Drive | Shaft |
| Front Suspension | Telescopic fork |
| Rear Suspension | Dual shocks |
| Front Brakes | Dual disc |
| Rear Brakes | Drum |
| Rear Tire | 130/90-16 |
| Seat Height | 765 mm (30.1 inches) |
| Fuel System | 4 x 32mm Keihin carburetors |
Specific torque settings for engine and chassis fasteners, crucial for proper assembly and safety.
Step-by-step procedure for changing the engine oil and oil filter, ensuring proper lubrication.
Recommended maintenance intervals and tasks for the V45 Sabre model based on mileage.
Information on the transistorized ignition system, including checks and potential issues.
Detailed steps for safely removing the carburetors from the V45 Sabre model for servicing.
Procedure for adjusting pilot screws to optimize engine idle and fuel mixture for performance.
Step-by-step guide for replacing brake fluid and bleeding the clutch system to ensure proper operation.
Instructions for disassembling the clutch master cylinder, including fluid draining and component removal.
Procedure for disassembling the clutch slave cylinder, including removal of the rear crankcase cover and fluid disconnection.
Procedure for removing the camshafts, including draining fluids and removing related components.
Steps for removing the cylinder head, including loosening hose clamps and removing mounting bolts.
Detailed steps for replacing valve guides, including heating the cylinder head and using specialized tools.
Diagnostic guide for ignition system issues, covering engine starting problems, spark issues, and timing.
Diagnostic guide for engine starting issues, covering fuel, spark, and compression problems.
Troubleshooting steps for diagnosing engine power loss, including checks for wheels, pressure, and engine speed.
Steps to address poor engine performance at low speeds, focusing on ignition, carburetor, and fuel system checks.
Maintenance schedules specific to the 1983 V45 Sabre VF750S model, detailing tasks and intervals.
Technical features related to the cylinder head and valve system, including specifications and procedures.
To Next Page
