AlarmNet360 Online Help Guide
– 36 –
Contents
Adding TUX series Automation Devices
Note: You can use TUX only on Vista series panels.
To add TUX devices to a TC2 ready control panel (such as a VISTA 21-iP) perform the following:
1. Select the account and click the adjacent
+ to expand.
2. Select the Location. (Accounts may have multiple locations.)
3. Under Action, click the
icon to add a device. The Add Device window appears.
4. Enter a meaningful Device Name, then from the drop-down menu select the Automation.
5. Enter the MAC number and CRC for the device, and click Save.
The device has been added.
To Next Page
Loading...
