Honeywell CK65 Series - Physical and Environmental Specifications; Barcode Symbologies Supported

90 CK65 Mobile Computer User Guide
3. Install the Honeywell Download Manager tool. See “Note” on the portal page.
This tool is required for downloads.
4. Locate the app or upgrade you want to download in the Software directory.
5. If prompted, enter additional information, and click Submit.
6. Select Download. Follow the prompts to download the file.
About Transferring Files via USB Connection
If you plan on using a USB connection to transfer the upgrade files to the mobile
computer, make sure you set the USB connection to allow file transfers. To learn
more, see Configure USB Connection and Transfer Files on page 32.
Install Software with AutoInstall
Important: The CK65 must have power for the entire length of the install process or it could
become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Provisioning mode.
3. Tap the toggle button to turn Provisioning mode On.
4. Save the upgrade file (*.zip or *.apk) in one of the following folders on the CK65
mobile computer:
• Internal shared storage\honeywell\autoinstall
Software upgrades saved to this folder for installation do not persist when an
Erase all data (factory reset) or Enterprise data reset is performed.
• IPSM card\honeywell\autoinstall
Software upgrades saved to this folder do not persist when an Erase all data
(factory reset) is performed. However, the upgrade does persist if an
Enterprise data reset is performed.
5. Swipe up from the bottom of the Home screen to access all apps.
6. Tap AutoInstall Settings and verify Enable AutoInstall is On .
7. Tap Packages Update from the AutoInstall Settings screen.
The computer automatically initiates a reboot and installs the
software upgrade. The system update screen appears during the upgrade
process. When the update is finished, the lock screen appears.
8. Once installation is complete, turn Provisioning mode Off.
Note: Some updates do not require the computer to reboot before installation.