Honeywell CK65 Series User Manual

CK65 Mobile Computer User Guide 103
Note: DPI can be calculated based on the following formula:
Horizontal DPI = 1920 pixels/width of horizontal field of view (inches)
Vertical DPI = 1080 pixels/width of vertical field of view (inches)
S0703-SR Standard Range Imager Reading Distances
The depth of field measurements used the following parameters:
• Distances are measured from the front of the Imager.
• +23 °C (+73 °F), 0 lux for guaranteed, 200 lux for typical.
• Photographic quality codes
Note: Time to Read and Depth of Field will be impacted if the barcode symbol is at the edge
of the image.
Guaranteed Specs
Far Field (Discrete Focus Lens Module)
Horizontal Field Angle (degrees) 13.7°
Vertical Field Angle (degrees) 7.6°
Focus Standard Range
Symbology Near Distance Far Distance
5 mils Code 39 mm 79 270
in. 3.11 10.63
6.7 mils PDF417 mm 96 236
in. 3.78 9.29
10 mils Code 39 mm 40 425
in. 1.57 16.73
10 mils Data Matrix mm 83 236
in. 3.27 9.29
13 mils UPC-A mm 44 493
in. 1.73 19.41
15 mils Code 128 mm 42 572
in. 1.65 22.52
15 mils QR mm 39 390
in. 1.54 15.35
20 mils Code 39 mm 44 674
in. 1.73 26.53
1
Minimum distance depends on the length of the barcode.
2
Typical code wide to narrow elemental ratio is 3:1. Minimum 100 mils code height of 3 inches.

Honeywell CK65 Series Specifications

General

Processor	2.2 GHz Qualcomm Snapdragon 660 octa-core
Memory	4 GB RAM, 32 GB Flash
Battery	7, 000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, NFC
Camera	13 MP rear camera
Durability	IP65 rated
Touch Panel	Capacitive multi-touch
Keypad	numeric keypad
Scanning	Honeywell N6703 2D imager
Operating Temperature	-20°C to 50°C (-4°F to 122°F)
Drop Specification	Withstands drops to concrete per MIL-STD 810G
Display	4.0 in WVGA (480 x 800) bright color LCD with backlight, outdoor viewable