42 CK65 Mobile Computer User Guide
b. Tap Time then use the clock to select a new time and click OK.
4. To change the time zone, tap Use location to set time zone to turn Off the
feature.
a. Tap Time zone and choose the time zone for your location.
About Honeywell Applications
Honeywell applications help you troubleshoot and connect your computer to other
devices and networks. Some of the applications in this table are located in the
Power Tools app. To learn more about Honeywell Power Tools, go to
sps.honeywell.com to download the Power Tools User Guide.
Honeywell Applications Available on the Computer
Icon Application Description
AutoInstall Settings Enable the AutoInstall feature, to automatically install
*.zip or *.apk files containing applications saved in the
Internal shared storage\honeywell\autoinstall folder and
IPSM card\honeywell\autoinstall folder on the computer
during the power-up boot or reboot process.
Demos Honeywell Demo apps demonstrate the basic capabilities of
the computer and are not intended as functional business
solutions. The demos included, demonstrate scanning,
signature capture, NFC functionality, and printing via
Bluetooth technology.
Information on how to create custom applications for your
Honeywell mobile computer can be found in the Honeywell
Software Development Kit (SDK) for Android, available from
the Technical Support Downloads Portal.
HUpgrader Use the HUpgrader app to view the current OTA version on
the computer, check for updates, or initiate an OTA upgrade
from storage.
Scanner Edge Use the Scanner Edge app to connect or disconnect a
Bluetooth scanner.
• View connected devices.
• Pair with a Bluetooth Scanner.
• Disconnect a Bluetooth Scanner.
Power Tools
BattMon BattMon provides information on the charge status and
health of the battery, and provides access to activate battery
status notifications and battery charging history logs.
ConfigApps ConfigApps enables or disables applications and application
updates.
Configure Autorun Configure Autorun provides the ability to set applications to
automatically run after a reboot.
To Next Page
Loading...
