CK65 Mobile Computer User Guide 75
• To remove a network from your saved list, tap the network name and select
Forget. You can do this for networks you no longer use.
Configure Proxy Settings for a Wi-Fi Network
If you need to connect to network resources through a proxy server, you can
configure settings for the proxy server for each Wi-Fi network you add. By default,
the Wi-Fi networks you add are not configured to connect through a proxy server.
Note: Proxy settings apply only to the Wi-Fi network you modify. You must change proxy
settings for each network requiring a proxy server.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & internet > Wi-Fi. The list of available Wi-Fi
networks appears.
3. Select the network to display the Network details.
4. Tap the Edit icon .
5. Tap Advanced options.
6. Under Proxy, select Manual.
7. Enter the proxy settings for the network.
8. Tap Save.
Disable Wi-Fi Notifications
By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & internet > Wi-Fi. Verify the WLAN radio is turned
On.
3. Navigate to the bottom of the discovered network list.
4. Select Wi-Fi preferences.
5. Tap Notify for public networks to toggle the setting On or Off.
Connect to an Ethernet Network
To connect the computer to an Ethernet network, you need a CK65 Ethernet Home
Base or a CK65 Net Base.
1. Make sure the base is connected to your Ethernet network.
2. Place the computer in the base.
To Next Page
Loading...
Need help?
General
