82 CK65 Mobile Computer User Guide
3. Tap the menu icon and then tap Disconnect BT Scanner.
4. Tap Honeywell or Intermec.
5. Scan the Disconnect Barcode displayed on screen.
About Serial and USB Communications
You can use these optional CK65 accessories to transmit data to and receive data
from another device through serial or USB communications:
•Vehicle dock
•Home Base
• Ethernet Home Base
For information about these accessories, contact your local sales representative.
USB Troubleshooting
• If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see Developer Information on page 83.
• Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files on page 32.
About Near Field Communication (NFC)
NFC technology provides the ability for short-range, wireless data transfer
between the CK65 and NFC tags or other NFC enabled devices placed in close
proximity to the back of the computer. All CK65 mobile computers support the
following modes of operation:
• NFC tag reader/writer mode: The computer reads and/or writes digital
information from or to an NFC tag.
• Peer-to-Peer (P2P) mode: The computer uses Android Beam and/or Bluetooth
technology to transfer screen content (e.g., a picture, contact information, Web
page URL, or file) between NFC enabled devices.
• NFC card emulation mode: The computer emulates an NFC card (smart card)
that an external card reader can access. You can download and install apps for
card emulation mode from the Google Play Store. Some examples include
digital wallets (e-wallets) offered by your bank or credit card company and
Google Pay.
To Next Page
Loading...
Need help?
General
