8 CK65 Mobile Computer User Guide
Cold Environments
When replacing a battery in a CK65 that has been used in a cold environment,
either:
• Replace the battery in the computer while still in the cold environment. For more
information, see Important Environmental Considerations on page 8.
OR
• Remove the computer from the cold environment and allow it to come to room
temperature before replacing the battery.
Important Environmental Considerations
Environmental variations can quickly cause moisture to form on exposed surfaces
during battery exchanges and mobile computer location changes for charging.
This is why it is always important to ensure all exposed surfaces are dry and free
of moisture buildup before installation, especially if the devices have sensitive
communication/charging contacts. Examples of moisture include, but are not
limited to condensation in the form of frost, dew and fog.
Hot Swap
You can replace the battery on demand provided the following conditions are met:
• The computer has been powered on for at least 4 minutes.
AND
• You insert a new battery within 30 seconds.
Swap Battery Mode
Swap Battery mode places the computer in a low power state so that the battery
can be removed for a short time.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power > Swap Battery. Follow the on-screen instructions to place the unit
in battery swap mode.
4. Release the end of the hand strap at the bottom of the computer.
5. Push the battery latch toward the battery to release the lock.
6. Lift up the edge of the battery and remove it from the computer.
7. Insert the charged battery into the computer.
8. Press down on the bottom edge of the battery to engage the lock.
Caution: Do not store a computer in a cold environment without a
battery inserted.
To Next Page
Loading...
Need help?
General
