Honeywell CK65 Series User Manual

CK65 Mobile Computer User Guide 37
About Status Bar Icons
Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Remap a Button or Key
You can change the default function of the Left Scan, Right Scan, or Camera
buttons as well as the Back, Recent, Home, and Search virtual buttons.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Keyremap.
3. Tap the plus sign (+).
4. Press the button you want to remap or select one of the virtual buttons.
5. Tap OK.
Icon Description Icon Description
Pending alarm and Alarm is set Airplane mode is turned On.
New text message or multimedia
message
Bluetooth is turned On.
Error with text or multimedia message
delivery
SD card is full
New email Wi-Fi network connected with full
signal strength
Computer is connected to a PC with a
USB cable
Wi-Fi network connected but no signal
strength
Synchronizing data Error with sync or sign-in
The Chill timer has expired and
computer is cold enough the
heaters can be turned on. For more
information, see About Cold Storage
Heaters (page 25).
Heaters are turned on. For more
information, see About Cold Storage
Heaters (page 25).
Computer is connected with Ethernet

Honeywell CK65 Series Specifications

General

Processor	2.2 GHz Qualcomm Snapdragon 660 octa-core
Memory	4 GB RAM, 32 GB Flash
Battery	7, 000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, NFC
Camera	13 MP rear camera
Durability	IP65 rated
Touch Panel	Capacitive multi-touch
Keypad	numeric keypad
Scanning	Honeywell N6703 2D imager
Operating Temperature	-20°C to 50°C (-4°F to 122°F)
Drop Specification	Withstands drops to concrete per MIL-STD 810G
Display	4.0 in WVGA (480 x 800) bright color LCD with backlight, outdoor viewable