Honeywell CK65 Series - Maintenance; Clean the Computer

96 CK65 Mobile Computer User Guide
Repairs
Repairs and/or upgrades are not to be performed on this product. These services
are to be performed only by an authorized service center (see Customer Support on
page ix).
Maintenance
Your device provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following sections describe
periodic checks to ensure dependable operation.
Clean the Computer
The CK65 housing, scanner window, camera window and touch screen may be
cleaned with a soft cloth dampened with water or a mild detergent-water solution.
If a mild detergent solution is used, wipe the computer with a clean cloth
dampened only with water to remove any detergent residue.
Note: Always turn off the CK65 and leave the battery installed when you clean the
computer.
Note: Reading performance may degrade if the scanner window is not clean. If the window
is visibly dirty, or if the scanner is not operating well, clean the window.
Caution: Do not submerge the computer in water or cleaning solution.
Do not use abrasive wipes or cloths on the windows or touch
screen. Abrasive wipes may scratch the windows and touch
screen. Never use solvents (e.g., acetone) on the housing or
window. Solvents may damage the computer finish, the
windows or touch screen.
Caution: Ensure all components are dry prior to mating the computer
with charging accessories or other peripheral devices. Mating
wet components may cause damage not covered by the
warranty.