Honeywell GENT Nano panel-based - To Save loop map and make SAFE device addresses; To Clear loop map and UNSAFE saved addresses from loop devices

To 'Save loop map' and make 'SAFE' device addresses
The Soft addresses given to devices on the loop can be locked and saved in the non volatile memory (made SAFE) within each device and carried with the device. You will need to be at access level 4
to SAFE address devices on the loop.
To 'Clear loop map' and 'UNSAFE' saved addresses from loop devices
The SAFE addresses can be cleared from all the devices on the loop circuit. The devices on the loop will revert to soft addresses.You will need to be at access level 4 to unlock addresses at devices on
the loop.
4188-949 issue 3_05/10_Nano Comms inst. 33
Nano panel based system
To 'Save loop map' and make 'SAFE' device addresses
Save
Select
Warning! Selecting this option will
program the current address into
all devices non-volatile memory
Allow 30 seconds for task to complete
Are you sure?
Accept Quit
Accep
t
Select Select
Engineering
Menu
Map >
Select
Loop >
Select
Select
Engineering
Menu
Map >
Select
Clear
Select
10:15 Tue 16/02/10
Warning! Selecting this option will
remove the locked addresses from
all devices non-volatile memory
Allow 30 seconds for task to complete
Are you sure?
Accept Quit
Accep
t
Loop >