Honeywell GENT Nano panel-based - How to view or print device Time averages

How to view or print device 'Time averages'
"
Ensure all the dust covers have been removed from every sensor heads and the system is allowed to operate for at least 24 hours to obtain accurate time average and
condition code readings.
You will need to be at Access level 4 to view or print time average data of devices on the loop, if printing ensure a printer is connected to the panel.
Commissioning instructions
50 4188-949 issue 3_05/10_Nano Comms inst.
How to view or print device 'Time averages'
Select
Loop >
SelectSelect
Engineering
Menu
10:15 Tue 16/02/10
Loop Map
1 Device 1
2 Device 2
3 Device 3
4 Device 4
Select Quit
9
9
9
9
Map
Select
View
Print
Select
Select
Averages
Select
View Averages
Print Averages
10:15 Tue 16/02/10
Print Time Average Values
WARNING! This option will print the
Time Average Values for
[Device 1 Channel 1 ]
ARE YOU SURE YOU WISH TO PROCEED?
Print Quit
Yes
DEVICE
10:15 Tue 16/02/10
Time Average Values
[Device 1 Channel 1 ]
Latest: 064
T1->T5: 252 252 252 252 252
T6->T11: 064 064 064 064 064 064
Update Back
To scroll the
range
To move to
the next setting
Select
Select
Select
Update
Yes
To scroll to the
next channel.
Settings