Honeywell GENT Nano panel-based - How to back up all system configuration and labels to a SD card; How to back up all labels to a SD card

How to back up all system configuration and labels to a SD card
The system configuration data and labels can be backed up to a SD card. You will need to be at access level 4 to perform this back up.
How to back up all labels to a SD card
The system labels can be backed up to a SD card. You will need to be at access level 4 to perform this back up.
Commissioning instructions
68 4188-949 issue 3_05/10_Nano Comms inst.
How to back up all system configuration and labels to a SD card
Select
Maintenance >
Select
Engineering
SD Card
Select
Backup
Select
16:15 Tue 16/02/10
This will overwrite the configuration
data on your SD card!!
Are you sure?
Yes No
Yes
EnsuretheSDcardisfittedintothe
Main Controller Board
Menu
Main Control board
SD card
DO NOT remove the SD card
while the RED LED is flashing.
RED LED
Select
All
Select
Maintenance >
Select
Engineering
SD Card
Select
Backup
Select
16:15 Tue 16/02/10
This will overwrite the label
data on your SD card!
Are you sure?
Yes No
Yes
EnsuretheSDcardisfittedintothe
Main Controller Board
Menu
Main Control board
SD card
DO NOT remove the SD card
while the RED LED is flashing.
RED LED
Select
Labels