Honeywell GENT Nano panel-based - Typical Device Forms

Typical device forms
Commissioning instructions
38 4188-949 issue 3_05/10_Nano Comms inst.
How to view or change 'Device configuration'
10:22 Tue 16/02/10
Device: [ 7] Settings Find:[OFF]
Label:[Device Label ]
Type : Single Input Interface
Assigned to Zone:[ 1] Sect:[15]
Mode: [CONVENTIONAL ZONE ]
Supervisory function: [N/A]
Save Quit
10:18 Tue 16/02/10
Device :[ 4] Settings Find:[OFF]
Label:[Device Label ]
Type: OH Sensor + Strobe
Assigned to Zone:[ 1] Sect:[ 2] ML: [OFF]
Sensitivity States Night:[ 0] Day:[ 5]
Output Level: [-21 dB] Mode : TONE
Save Quit
16:17 Tue 09/03/10
Device:[ 37] Settings Find:[OFF]
Label:[Device Label ]
Type: OH Sensor + Strobe
Assigned to Zone:[ 1] Sect:[ 2] ML: [OFF]
Sensitivity States : Night:[ 0] Day:[ 0]
Save Quit
16:21 Tue 09/03/10
Device:[ 7] Settings Find [OFF]
Label:[Device Label ]
Type: Optical Sensor + Strobe
Assigned to Zone:[ 1] Sect:[ 2] ML: [OFF]
Sensitivity States Night:[ 0] Day:[ 0]
Output Level:[-0dB ] Mode :[VOICE]
Save Quit
16:19 Tue 09/03/10
Device: [ 5] Settings Find:[OFF]
Label:[Device Label ]
Type: Optical Heat Sensor
Assigned to Zone:[ 1] ML: [OFF]
Sensitivity States : Night:[ 0] Day:[ 0]
Save Quit
16:25 Tue 16/02/10
Device [ 11] Channel [1] Settings
Label:[Device label ]
Type: Single Input Keyswitch Interface
Assigned to Zone:[12] Sect:[12]
Supervisory Function: [DAY/NIGHT SWITCH ]
Save Quit
Optical Heat Sensor and Strobe Optical Heat SensorOptical Heat Sensor Strobe
Optical Sensor and Strobe SounderSingle-Channel Input interface
Single Input Keyswitch Interface
10:23 Tue 16/02/10
Device: [ 8] Channel [1] Settings
Label:[Device label ]
Type: Sounder
Assigned to Sect: Sect [ 1]
Output Level: [-0dB ]
Save Quit
16:27 Tue 16/02/10
Device:[ 14] Settings Find:[OFF]
Label:[Device Label ]
Type: OH Sensor
Assigned to Zone:[ 1] ML: [OFF]
Sensitivity States Night:[ 0] Day:[ 0]
Save Quit
16:26 Tue 16/02/10
Device [ 13] Channel [1] Settings
Label:[Device label ]
Type: Sounder Strobe
Assigned to Sect:[ 1]
Output Level: [-0dB]
Save Quit
Sounder Strobe Optical Heat Sensor
16:29 Fri 16/02/10
Device:[ 17] Settings Find:[OFF]
Label:[Device Label ]
Type: OH Sensor
Assigned to Zone:[ 1] Sect:[ 2] ML:[OFF]
Sensitivity States : Night:[ 0] Day:[ 0]
Output Level:[-0dB ] Mode :TONE
Save Quit
Optical heat Sensor
16:30 Tue 16/02/10
Device:[ 18] Settings Find:[OFF]
Label:[Device Label ]
Type: Optical Sensor
Assigned to Zone:[ 1] ML: [OFF]
Sensitivity States Night:[ 0] Day:[ 0]
Save Quit
Optical Sensor
16:31 Tue 16/02/10
Device:[ 20] Settings Find:[OFF]
Label:[Device Label ]
Type: Heat Sensor + Strobe
Assigned to Zone:[ 1] Sect:[ 2] ML: [Off]
Sensitivity States Night:[ 0] Day:[ 5]
Output Level:[-21dB] Mode: TONE
Save Quit
Heat Sensor + Strobe
16:15 Tue 16/02/10
Device:[ 2] Settings Find:[OFF]
Label:[Device Label ]
Type: Tee-Breaker
Save Quit
10:20 Tue 16/02/10
Device:[ 6] Settings Find:[OFF]
Label:[Device label ]
Type: Sounder Strobe
Assigned to Sect:[ 2]
Output Level: [-0dB] Mode: [TONE]
Save Quit
16:28 Mon 16/02/10
Device:[ 16] Settings Find:[OFF]
Label:[Device Label ]
Type: Strobe
Assigned to Sect:[ 2]
Save Quit
Tee-Breaker
Sounder Strobe
16:24 Tue 16/02/10
Device:[ 10] Settings Find:[OFF]
Label:[Device Label ]
Type: Four Channel LV Interface
Save Quit
Four Channel LV Interface ¯
Strobe
TONE
‘VOICE’
TONE
‘VOICE’
¯ The Zone and sector settings are possible
using Settings -> Loop -> Channel.