38 | HRG Performance Series DVR User Guide
www.honeywellvideo.com
Figure 2-4 Entering the HDD Management Window
5. At the prompt, click Enter to open the HDD Management window (see Figure 2-5).
6. If a new hard drive was recently installed, select the HDD from the list, and then click Init to
initialize it.
Initializing the HDD will format it and remove all data from it.
Figure 2-5 HDD Management Window
7. After the HDD has been initialized, click OK to return to the Setup Wizard.
8. Click Next to continue to the Record Settings window.
To Next Page
Loading...
