Honeywell NETAXS NX4L1

70 www.honeywell.com
NetAXS™ Standalone Operation
Standalone Commands
3.2 D (Date) Command
_D=pn_mm/dd/yyyy_day<CR>
Variables:
pn = panel number (1–31)
mm = month number (1–12)
dd = day number (1–31)
yyyy = year number (e.g., 2007, 1999, etc.)
day = day of week (1–7):
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
7 = Sunday
Note: The day of week setting is a hold-over from an old command. The panel using
the mm/dd/yyyy information will automatically configure panel to the correct day of
the week, regardless of the setting selected in day of week. But the command still
requires a value to be entered in its place of 1–7.
Example 1
_D=1_01/09/2007_5<CR>
This command would set panel 1 to a date of 1/9/2007 and to Tuesday as the day of
the week.
Example 2
_D=25_12/14/2009_7<CR>
This command would set panel 25 to a date of 12/14/2009 with a day of week being
Monday.