Honeywell NETAXS NX4L1 User Manual

74 www.honeywell.com
NetAXS™ Standalone Operation
Standalone Commands
3.8 Flow Control Disable/Enable Command
(Use this command only for a drop line panel using RS-232 in standalone mode)
_U=[panel name]_{D|E}
Parameters:
D: Disable
E: Enable
Example
_U=30_D
This disables the flow control on panel 30 and prevents the panel’s buffers from
filling. After a hard reset of the panel, the flow control is re-enabled.

Honeywell NETAXS NX4L1 Specifications

General

Brand	Honeywell
Model	NETAXS NX4L1
Category	Control Unit
Language	English