Thermostats
8 customer.honeywell.com 70-6925
TP9600 Pneumatic Thermostat
Pneumatic thermostat for proportional control of pneumatic
valves and actuators with one- or two-pipe systems. Available with
two cover options, the TP9600 is not only affordable and easy to
install, but it controls temperature with the reliability that only
Honeywell can provide.
• TP9600 delivers the Honeywell TP970s unparalleled sensing and
control.
• Redesigned models fit your high-volume pneumatic applications.
• Backplate mounts quickly.
• Thermostat snaps onto backplate.
• Cover is mounted and locked into place with concealed setscrews.
• Attractive Euro-contoured design comes with choice of two cover
options.
• Neutral taupe color blends with today’s commercial interiors.
• Adapter kits are available to retrofit most pneumatic jobs.
• Branchline capacity Low for TP9630 and TP9633 Branchline
capacity High for TP9600, TP9610, TP9603, TP9620.
Application Type: Wall Thermostat
Dimensions, Approximate: 3 1/4 in. high x 2 in. wide x 1 5/8 in. deep
(83 mm high x 51 mm wide x 41 mm deep)
Airflow Usage: 0.011 scfm (5.2 mL/s)
Air Connections: Barb fittings 5/32 in. (4 mm)
Mounting: Vertical Wall Mounting
Operating Temperature: 50 F to 100 F (10 C to 38 C)
Storage Temperature: 150 F maximum (66 C maximum)
Remote Bulb: No
Sensor Element: Bimetal
Maximum Operating Pressure: 25 psi (170 kPa)
Accessories:
14002913-001 .005 in. Blue Filter Restriction Assembly; Inlet: 1/4 in.,
Outlets: 1/4 in. and 5/32 in.; Order in Quantities of 10
14002362-001 Duct Sampling Chamber
14002913-004
0.005 in. Blue In-line Filtered Restriction Assembly; Inlet:
1/4 in., Outlets: 5/32 in. and 5/32 in
14002430-001 Thermostat Guard
14004439-001 Setpoint Extension
14004911-001 Taupe Converastat wall plate with 2 screws
14003192-001 Wallplate adapter kit. Adapts HP970 or TP970 series
stats to HP900 and TP900 flush mounted and TP910 series flush or
surface mounted installations
305965 1-1/2 in. diameter, 1/8 NPT center stem back mount Pressure
Indicating gauge (0 to 30 psi scale) with +/- 4% accuracy
AK3863 Honeywell Thermostat Tool Kit, TP970/TP900
CCT729A Gauge Adapter for Calibration. Add 305965 0 to 30 psi
gauge for Complete Tool.
CCT735A Thermostat Calibration Tool includes Allen wrench for cover
installation.
Replacement Parts:
14001865-001 Filter Cartridge Assembly
14002053-001 Back Plate Assembly
14002573-001 Modernization Kit to convert all 1 & 2 pipe Honeywell &
competitive pneumatic stats to TP970, TP971A, TP972, TP973,
TP974, TP9600 family; HP970, HP971 and HP972
14002374-004 Restrictor Block Assembly, 0.005 in., For TP970A-D;
TP971A-E except C; TP972A; TP973A-B; TP9600 family; HP970A-B;
and HP972B
Product
Number Action
Number
of Pipes Setpoint
Setpoint
Temperature
Range Changeover
Throttling
Range
Includes(F) (psi) (kPa) (F)
TP9600A1007 Direct Acting 2 Single 60 F to 90 F — — 2 F to 10 F Cover, Setpoint, and
Thermometer are
Visible
TP9600B1006 Reverse Acting 2 Single 60 F to 90 F — — 2 F to 10 F Cover, Setpoint, and
Thermometer are
Visible
TP9603A1001 Direct Acting 2 Single 60 F to 90 F — — 2 F to 10 F Blank Cover, Setpoint,
and Thermometer are
Not Visible
TP9610A1006 Direct Acting 2 Day/Night Day: 60 F to 90 F,
Night: 50 F to 75 F
Day 13 psi,
Night 18 psi
Day 90 kPa,
Night 124 kPa
2 F to 10 F Cover, Setpoint, and
Thermometer are
Visible
TP9620A1005 Direct Acting
Heating,
Reverse Acting
Cooling
2 Single 60 F to 90 F Heat 18 psi,
Cool 13 psi
Heat 124 kPa,
Cool 90 kPa
2 F to 10 F Cover, Setpoint, and
Thermometer are
Visible
TP9630A1004 Direct Acting 1 or 2 Single 60 F to 90 F — — 2 F to 10 F Cover, Setpoint, and
Thermometer are
Visible
TP9630B1003 Reverse Acting 1 or 2 Single 60 F to 90 F — — 2 F to 10 F Cover, Setpoint, and
Thermometer are
Visible
To Next Page
Loading...
Need help?
General
