EasyManua.ls Logo

Honeywell Pneumatic Controls - RP971 Pneumatic Ratio Relay; Ratio

Honeywell Pneumatic Controls
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Relays
Humidistats
and
Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories
Engineering
Guide
Cross
Reference
70-6925 59
RP971 Pneumatic Ratio Relay
A four port non-bleed pneumatic relay which produces a
modulating pressure output, proportional in a fixed ratio to pilot
input changes. It is used to control pneumatic valve or damper
actuators in sequence from a single thermostat. Replacement
devices are available for Johnson, Powers, Robertshaw, Barber-
Colman, and older Honeywell devices.
Adjustable pilot start point pressures.
Two pilot pressure spans available.
Four sharp-barb air connections.
Molded plastic construction with neoprene.
Mounting clip provided.
RP971A Typical Piping
Type: Pneumatic, Four Port Ratio Relay
Dimensions, Approximate: 2 in. diameter x 2 5/8 in. deep
(52 mm dia. x 67 mm deep)
Airflow Usage: 0.002 scfm (1.0 mL/s) maximum
Air Connections: Barb fittings, Port 1: 1/4 in. (6 mm) O.D. plastic
tubing; Other Ports: 5/32 in. (4 mm) O.D. plastic tubing
Action: Direct Acting
Capacity: 0.039 scfm at 1 psi differential (18 mL/s at 5 kPa differential)
Mounting: Wall or In-line or panel
Operating Humidity Range (% RH): 5 to 95% RH
Temperature Range: 0 F to 140 F (-18 C to +60 C)
Maximum Safe Operating Pressure: 30 psi (205 kPa)
Pilot Start Pressure: Adjustable 0 to 10 psi (Adjustable 0 to 69 kPa)
Output Span: 3 to 13 psi (21 to 90 kPa)
Accessories:
14003203-003 Conversion Kit to convert Johnson, Powers,
Robertshaw, Barber Coleman and older Honeywell switches
801629T Clip for surface mounting
EXH
EXH
3-6 PSI
(21-41 kPa)
6-9 PSI
(41-62 kPa)
9-12 PSI
(62-83 kPa)
ROOM
THERMOSTAT
ALL DAMPER
ACTUATOR
SPRING RANGES
3-13 PSI
(20-90 kPa)
C4478-1
EXH
PILOT START
POINT (PSP)
3 PSI (32 kPa)
PSP
6 PSI
(41 kPa)
PSP 9 PSI
(62 kPa)
ALL THREE
RP971As
3 PSI
(32 kPa)
PILOT SPANS
M
M
41
3
2
41
3
2
41
3
2
Product Number Operation
Pilot Input Span
Description Includes(psi) (kPa)
RP971A1007 Produces modulating
pressure output proportional
to pilot pressure input
changes
3 psi input span for
3 to 13 psi output
Wall, In-Line or panel
mounted Pneumatic
Four Port Ratio Relay
14003030-002 Mounting Clip and
scaleplate with psi markings
RP971A1015 Produces modulating
pressure output proportional
to pilot pressure input
changes
5 psi input span for
3 to 13 psi output
Wall, In-Line or panel
mounted Pneumatic
Four Port Ratio Relay
14003030-002 Mounting Clip and
scaleplate with psi markings
RP971A1023 Produces modulating
pressure output proportional
to pilot pressure input
changes
21 kPa input span for
21 to 90 kPa output
Wall, In-Line or panel
mounted Pneumatic
Four Port Ratio Relay
14003030-002 Mounting Clip and
scaleplate with kPa markings
RP971A1031 Produces modulating
pressure output proportional
to pilot pressure input
changes
34 kPa input span for
34 to 90 kPa output
Wall, In-Line or panel
mounted Pneumatic
Four Port Ratio Relay
14003030-002 Mounting Clip and
scaleplate with kPa markings

Table of Contents

Related product manuals