Honeywell Pneumatic Controls - Pneumatic Temperature Controller Accessories; Pneumatic Temperature Controller Replacement Parts; Temperature Controller

Temperature Controllers
Humidistats
and
Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories
Engineering
Guide
Cross
Reference
70-6925 37
Pneumatic Temperature Controller Accessories
Pneumatic Temperature Controller Replacement Parts
Product Number Description Used With
14000786-001 Receiver Gauge, 25 F-125 F scale, 1 1/2 in. diameter, 1/8 in. NPT connection RP920;
14000786-002 Receiver Gauge, -5 to 55 C scale, 1 1/2 in. diameter, 1/8 in. NPT connection RP920;
14000786-003 Receiver Gauge, 15 to 75% RH scale, 1 1/2 in. diameter, 1/8 in. NPT
connection
RP920;
14000786-004 Receiver Gauge, 65 to 95% RH scale, 1 1/2 in. diameter, 1/8 in. NPT
connection
RP920;
14000786-005 Receiver Gauge, 15 to 85% RH scale, 1 1/2 in. diameter, 1/8 in. NPT
connection
RP920;
14002696-001 Repair kit including filters, screens, washers, gaskets, O-rings, and restrictors
for RP908A and RP908B controllers
RP908;
14004278-002 Compensation module with gasket for RP920B and RP920D RP920;
14004322-001 DIN Rail Mount RP920;
14505694-003 13 3/4 inch (350 mm) long mounting rail for RP920 RP920;
14505694-004 17 3/4 inch (450 mm) long mounting rail for RP920 RP920;
305616 1-1/2 in. diameter, 1/8 NPT center stem back mount Receiver gauge (0 to 2 in.
w.c. scale) with +/- 2% accuracy
RP920;
305617 1-1/2 in. diameter, 1/8 NPT center stem back mount Receiver gauge (1.0 to
3.0 in. w.c. scale) with +/- 2% accuracy
RP920;
305929 1-1/2 in. diameter, 1/8 NPT center back stem mount Receiver gauge (-40 to
+160 F scale) with +/- 2% accuracy
RP920;
305930 1-1/2 in. diameter, 1/8 NPT center back stem mount Receiver gauge (0 to 200
F scale) with +/- 2% accuracy
RP920;
305931 1-1/2 in. diameter, 1/8 NPT center back stem mount Receiver gauge (40 to
240 F scale) with +/- 2% accuracy
RP920;
305965 1-1/2 in. diameter, 1/8 NPT center stem back mount Pressure Indicating
gauge (0 to 30 psi scale) with +/- 4% accuracy
RP920;
305972 Receiver gauge, 1-1/2 in. 1/8 NPT center back, temperature 50 to 100F RP920;
43188057-010 Clear plastic cover for all RP920A pneumatic controllers RP920;
43188123-010 Clear plastic cover for all RP920B, RP920C, RP920D pneumatic controllers RP920;
CCT813 Slide Rule for Calculating Pneumatic Controller Settings for all RP908 and
RP920's.
RP908;
RP920;
Product Number Description Used With
14003757-001 Seal screw for port 8 and O-ring repair parts for RP920 RP920;
14004277-003 Setpoint module with gasket with CPA for RP920 RP920;
14004286-002 Zinc plated metric machine screw, M3x0.5., 19 min., 26 - 0.8 RP920;
14004533-001 Connector block with gasket and CPA for RP920 RP920;
43188059-001 Setpoint knob for all RP920 pneumatic controllers RP920;
43915905-110 O-ring for filter in RP920 RP920;