Honeywell Pneumatic Controls User Manual

Damper Actuator
Humidistats
and
Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories
Engineering
Guide
Cross
Reference
70-6925 83
Pneumatic Damper Actuator Parts and Accessories
Product Number Description Used With
14000716-001 Internal, Normally Closed, Motor Mounting Kit with Right Drive
Ear, For MP909E and MP918.
MP909E,H
14001213-001 MP904A and B Diaphragm MP904A,B
14002061-001 Damper Linkage Kit w/ Template MP909E,F
14002850-001 Angle Bracket 5 3/8 in, 137 mm, long, 5 in, 127 mm, wide MP909D,E
14003640-001 Angle Bracket 3 in. (76 mm) long, 3 3/4 in. (95 mm) wide, 2 3/
4 in. (70 mm) high
MP913; MP909D
14003820-019 MP516 Bracket and Linkage Assembly MP516; MP909D
14004062-001 External Trunnion Mounting Bracket MP918A,B; MP909E,H
14004062-002 Internal N.C. Trunnion Mounting Bracket MP918A,B; MP909E,H
14004062-003 Internal N.O. Trunnion Mounting Bracket MP918A,B; MP909E,H
14004106-001 Actuator pushrod for conversion of internal N.C. to external MP918A,B; MP909E,H
14004106-002 Push rod assembly for internal N.C. MP918A,B; MP909E,H
14004107-001 Crankarm Assembly for conversion from internal N.C. to
external Trunnion mounting
MP918A,B; MP909E,H
14004136-001 MP904 Positive Positioner Retrofit Kit MP904A
14004137-001 Retrofit Kit for adding positive positioner to MP909E or repair
of MP909H
MP909E; MP909H
14004210-001 Feedback Spring Kit includes orange spring (3 psi [21kPa]),
yellow spring (5 psi [34 kPa]), and blue spring (10 psi [69
kPa]).
MP909H; MP918A
14004236-001 Coupler, actuator shaft to 5/16 in, 8 mm, pushrod MP918;
14004237-002 Bag assembly including 4 hex head slotted drill point screws
(14004513-001)
MP918A,B; MP909E,H
14004241-002 Hitch Pin (Six Sets) MP918A,B; MP909E,H
14003640
M11504
14004107
M11530
M11532
14004210

Honeywell Pneumatic Controls Specifications

General

Brand	Honeywell
Model	Pneumatic Controls
Category	Controller
Language	English