Damper Actuator
84 customer.honeywell.com 70-6925
14004242-001 MP918 Top Mount Operator Assembly MP918A,B
14004264-001 MP918 Repair kit including Positive Positioner, bracket
assembly and fittings
MP918A
14004264-002 MP918 Positive Positioner Retrofit Kit - includes 10 psi
feedback spring
MP918B
14004313-003 Hardware Bag assembly kit including Drive Axle (14004145-
001), Screw (15753279-001), Nut (7289-21), and Instruction
sheet in a Cloth Bag (7640)
MP918A; MP918B
14004324-001 Kit for Alternate External Top-Mount, MP909E,H MP918A,B MP918A,B; MP909E,H
14004345-001 Positive Positioner Kit, 10 psi feedback spring MP920B
14004350-001 Steel Clevis Pin (1/4 x 7/8) MP918
14004577-001 MP953 A, C, and E (Direct Acting, 5 in. diameter) Yoke/Base
Assembly
MP953A,C,E
15753692-001 Modular Kit for Jack Shaft Installation of MP909E and
MP918B Actuators
MP909E; MP918B
15753693-001 End kit for Jack Shaft Installation of MP909E and MP918B
Actuators
MP909E; MP918B
15753694-001 Operator kit for Jack Shaft Installation of MP909E and
MP918B Actuators
MP909E; MP918B
26025B Damper crank arm for 3/8 in. (9.5 mm) diameter axle.
Elongated slot for linkage connection. Slot scaled for 40-50-
60-75-90 degrees.
MP516; MP909D;
MP909E, H
27174B Damper crank arm for 7/16 in. (11.1 mm) diameter axle.
Elongated slot for linkage connection. Slot scaled for 40-50-
60-75-90 degrees.
MP516; MP513
309292 MP516A Diaphragm MP516
309389J Mounting Bracket and Linkage MP516
312809C MP904A and B Tube and Diaphragm Assembly MP904A,B
312817 MP953C (5 in. diameter) Cover MP953C (5 in.)
312867C Damper Crank Arm for 1/2 in. (12.7mm) diameter axle.
Elongated slot for linkage connection. Slot scaled for 45-60-
75-90 degrees
MP516; MP909D;
MP909E; MP909H
312867H Externally mounted Linkage Kit MP516; MP909D,E,H
314100 MP909A Replacement Diaphragm MP909A
314231 MP909B Replacement Diaphragm MP909B
314316A Crank Arm Assembly MP516
314440A MP909 - Clevis, Clevis Pin and Cotter Pin Assembly MP909
314503 MP909C Replacement Diaphragm MP909C
315321 Crankarm Balljoint (with 1/4 in male threads), fits 5/16 in.
diameter pushrod
MP516; MP909D,E,H;
MP913
315321G Crankarm and Linkage MP909A,D
315439/0062 Clevis MP909D
Product Number Description Used With
14004107
M11530
To Next Page
Loading...
