Honeywell SmartLine ST 700 - Introduction_St 700 Basic Transmitter; Overview; Features and Options; Table 29 - ST 700 Basic Transmitter - Features and Options

Revision 13 ST 700 SmartLine Pressure Transmitters User’s Manual Page 119
10. Introduction – ST 700 Basic Transmitter
10.1 Overview
This section is an introduction to the physical and functional characteristics Honeywell’s family of
the ST 700 basic SmartLine pressure transmitters.
If you are not sure which type of ST 700 you have, standrad or basic, please refer to Section 1 of this
manual
If you have a ST 700 standard transmitter, use Sections 2 through 9.
If you have a ST 700 basic transmitter, use Sections 10 through 17.
10.2 Features and Options
The ST 700 basic transmitter is available in a variety of models for measuring Differential Pressure
(DP), Gauge Pressure (GP), and Absolute Pressure (AP). Table 28 lists the protocols, human interface
(HMI), materials, approvals, and mounting bracket options for the ST 700.
Table 28 – ST 700 Basic Transmitter - Features and Options
Feature/Option
Basic/Available Options
Communication Protocols
HART

version 7.
Human-Machine Interface (HMI)
Options (Standard Display/External
Two buttons)
Standard Display (HART

only):
• Two-button programming (optional).
• Standard display language: English and Russian
only.
• Two-mode operations: PV display and menu
navigation.
Calibration
Single.
Approvals
See Appendix AAppendix AAppendix
A Appendix Afor details.
FM, CSA, ATEX, IECEx, SAEx, INMETRO, NEPSI,
GOST.
Mounting Brackets
Angle/flat carbon steel/304 and 316 stainless steel.
Integration Tools
Experion.
The 2-button option is available for the standard display.
The external 2-buttons option is available in this model.This is used for navigation of
standard display or for setting zero, span and zero correct where standard display is
not connected.