Page 14 ST 700 SmartLine Pressure Transmitters User’s Manual Revision 13
4.4.1 Summary
The ST 700 standard transmitter models, except flush mounts and those with integral flanges, can be
attached to a two-inch (50 millimeters) vertical or horizontal pipe using Honeywell’s optional angle
or flat mounting bracket; alternately you can use your own bracket. flush-mount models are attached
directly to a process pipe or tank by a one-inch weld nipple. Models with integral flanges are
supported by the flange connection.
Figure 4 shows a typical bracket-mounted and flange-mounted transmitter installations.
Figure 4 – ST 700 Standard Transmitter - Typical Bracket and Flange
Mounted Installations
To Next Page
Loading...
